Description

Engineered for extreme high-pressure fluid distribution and compact manifold plumbing, this Steel Service Street Tee is rated for an impressive 5,000 PSI. Built from high-strength carbon steel, this three-way fitting allows you to branch off a main line at a 90-degree angle while threading directly into a female equipment port—eliminating the need for an extra pipe nipple and reducing potential leak points.

Key Specifications

• Connection Type A (Run 1): 1/4″ FPT (Female Pipe Thread – Inner)

• Connection Type B (Run 2 – Opposite End): 1/4″ MPT (Male Pipe Thread – Outer)

• Connection Type C (90° Branch): 1/4″ FPT (Female Pipe Thread – Inner)

• Material: High-Strength Forged Carbon Steel

• Pressure Rating: 5,000 PSI (Maximum Working Pressure)

• Configuration: Street Tee / Service Tee (Male thread on one end of the straight run)

Product Highlights

• Strategic Street Configuration: Features a male thread on one end of the straight run, allowing the tee to screw directly into a pump block, unloader valve, or manifold. The remaining ports are female, providing a seamless pass-through and a 90-degree branch.

• Extreme 5,000 PSI Capability: Forged to easily withstand severe operational pressures, hydraulic spikes, and intense fluid velocities—significantly outperforming brass or standard cast iron fittings.

• Vibration & Stress Resistant: High tensile carbon steel construction resists cracking, thread stripping, and structural fatigue caused by the heavy vibrations of commercial gas engines and high-displacement pumps.

• Corrosion Protection: Plated with a durable zinc coating that shields the raw steel from rust, moisture, and chemical detergents in rugged wash environments.

Common Applications

• Pump Manifold Port Splitting: Threading the male end directly into a 1/4″ pump gauge or accessory port, using one female port for a high-pressure gauge and the other for a pressure switch or thermal relief valve.

• Unloader Valve Integration: Creating space-saving, high-pressure junction points directly on or around an unloader block to route bypass lines or chemical injectors.

• Diagnostic & Testing Tree: Building a compact, inline monitoring station on a pressure washer or hydraulic power unit to house sensors without cutting hoses.

• Multi-Line Hydraulic Routing: Branching high-pressure oil, gas, or water control lines smoothly within tight machinery frames.